DETAILS OF PARDEY FOUNDRY PATTERNS
Return to Pardey Foundry Patterns for Taleisin or Home Port
Taleisin of Victoria at Spaulding Boatworks
Cast fittings visible in this photo are the opening oval portlights, the boom gallows frames and the bow rollers (14” forward of the stem head) designed so a 35 lb. CQR anchor self-stows.
Details of Pardey Foundry Patterns for Taleisin of Victoria
Pattern ID Numbers
Show /
Hide
Patterns numbered as follows: (Use Show/Hide links above to overlay numbers on photo)
| 1. | Bobstay fitting |
| 2a. | Boomkin fitting incorporating backstay tang and anchor roller |
| 2b. | Tang for boomkin fitting |
| 3. | Cranse iron (bowsprit end fitting) |
| 3a. | Core box for cranse iron (bowsprit end fitting) |
| 4. | Whisker stay tang, starbd. |
| 4a. | Whisker stay tang, port |
| 5. | Boomkin stay tang (interchangeable) |
| 6. | Chainplate |
| 7. | Gammon Iron (stemhead fitting) |
| 8. | Chain roller (for bow) |
| 9. | Upper gudgeon (fits flush on the transom). See Larry Pardey's Details of Classic Boat Construction for fitting details of gudgeons and pintles. |
| 9a. | Lower gudgeon |
| 9b. | Rudder pintle and pin (needs 25a to complete the rudder pintle pattern) |
| 9c. | Middle gudgeon |
| 9d. | Middle gudgeon for boat with an engine (see separate photo below) |
| 12. | Jiffy reefing pennant fitting |
| 13. | Boom bail |
| 14. | Eye nut |
| 15. | Spinnaker pole fitting for instant spinnaker pole |
| 15a. | Spreader fittings, port and starboard |
| 16. | Mast boot band |
| 17. | Sheet winch mount. Cast two for post and starboard end of mount. |
| 18. | Lifeline stanchion base and core box |
| 19. | Hawse hole |
| 20a. | Boom gallows top (needs core box) |
| 20b. | Boom gallows core box (fits both top and base pattern) |
| 22. | Windvane gudgeon – at waterline |
| 23. | Dinghy chock base |
| 24. | Sculling oar lock |
| 25a. | Pin for pintle patter (9b) |
| 25b. | Cockpit Hatch hinge |
| 26. | Prism light frame — Simpson Lawerence standard prism glass |
| 29. | Oil lamp bracket for use on standard 1-1/2” diameter I.D brass waterpipe for table stanchions |
| 30. | Portlights, four pieces — Outer flange, inner flange, spigot, opening port |
| 31. | Windvane gudgeons, bottom, middle, top |
| 32. | Windvane tiller arm |
| 33. | Windvane gudgeon for bottom of rudder |
| 34. | Pin for pintle fitting |
9d middle gudgeon for boat with an engine
pardeypatterns.pdf
(File size: 136 kB) containing photos and list of patterns
Note
Two more patterns will be added to this list in the future: the production boards for making the 1/4” and 3/8” clench rings used throughout Taleisin's construction.
Availability of Patterns
These patterns are on long term loan to the Spaulding Wooden Boat Center. For information, or to arrange to use a pattern or patterns, please contact the Spaulding Center. A deposit is required for the off-site use of a pattern. A handling charge to cover the expenses incurred by the center will be deducted from the deposit upon the return of the pattern.
Contact
Spaulding Wooden Boat Center
Foot of Gate Five Road
Sausalito, CA 94965
415 332-3179 Phone
415-332-3821 Fax
